*NEW PRODUCT* Totalcomp TSP51 Single Point Load Cell - Totalcomp Scales & Components

Replacement for Sensortronics Model 60051. Mounting screws are 1/4- 28 UNF(fine) with 3/4” spacing on both top and bottom. 2 mv/v, 0.03% nonlinearity, 380/350 ohms, 10 ft 4 cond cable, stainless steel, IP67.

http://www.totalcomp.com/single-point-load-cells-tsp51-totalcomp-single-point-c-163_1139.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* HBM JRT Canister Torsion Ring Transducer - Totalcomp Scales & Components

Robust alloy steel construction. Low profile rocker pin load introduction. Corrosive resistant, environmentally sealed. JRT is a high capacity, low profile torsion ring type load cell. 2 mv/v, 750/700 ohm, 35 ft cable. NTEP 91-036A1 Class III L. FM Approved.

http://www.totalcomp.com/canister-load-cells-jrt-hbm-canister-c-30_1138.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* RADWAG PUE 7 Measuring Indicator - Totalcomp Scales & Components

PUE 7: Indicators are intended for building industrial scales. Plastic housing for rack installations. 5.7” color display, touch panel and membrane keypad. Counting pieces with labeling. Dosage with recipes. KTP (CPG) for pre-packages. Two proximity detectors with programmable functionality installed. Two platforms can be connected to the indicator. PUE 7 supports 1 weighing platform in standard version. Ports for barcode scanners, receipt and label printers, transponder card and readers and typical PC equipment. Window CE 6.0 operating system. Two proximity sensors. IP54. 230VAC.

PUE 7P: Indicators are intended for building industrial scales. Stainless steel housing for rack installations. 5.7” color display, touch panel and membrane keypad. Counting pieces with labeling. Dosage with recipes. KTP (CPG) for pre-packages. Two proximity detectors with programmable functionality installed. Four platforms can be connected to the indicator. PUE 7 supports 1 weighing platform in standard version. Ports for barcode scanners, receipt and label printers, transponder card and readers and typical PC equipment. Window CE 6.0 operating system. Front IP66/67, whole IP32. 15VDC

http://www.totalcomp.com/radwag-indicators-pue-7-radwag-indicator-c-325_1134_1135.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* RADWAG WLC/R Industrial Balance - Totalcomp Scales & Components

Stainless steel weighing platform. Backlit LCD display. Designed for fast and precise mass determination in laboratory and industrial conditions. WLC can be used in areas with no access to mains (230V), as their standard equipment they include internal rechargeable batteries. Applications for: Counting pieces, Checkweighing, Animal weighing, Percentage, Caps lock of max indication, Measurement in Newton. WLC have the possibility of weighing loads outside weighing platform, under hook weighing. Loads are hung under the instrument, an alternative for weighing loads with non-standard dimensions and shapes. RS232 output. IP43. 230 VAC.

http://www.totalcomp.com/industrial-balances-wlcr-radwag-industrial-c-625_1136.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* Totalcomp TRWS Digital Indicator - Totalcomp Scales & Components

Stainless steel. Digital weight indicator with backlit LCD display. 6 mechanical switch keys. Applications for: Check Weighing, Accumulation, Over/Under, Animal Weighing. Units for: lb, kg, g, oz, tj, hj. Internal counts: 600,000. Rechargeable battery provide up to 35 hours of continuous use. IP67 waterproof housing RS232 serial port. AC adapter.

http://www.totalcomp.com/totalcomp-weighing-indicators-trws-totalcomp-indicator-c-325_334_1133.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* Totalcomp TBT Scale Base - Totalcomp Scales & Components

Mild steel and stainless steel base. Stainless steel pan. Adjustable rubber feet. Bubble level. Overload stops. 3m load cell cable. Stainless steel base has stainless steel load cell. Aluminum base has aluminum load cell. 2 mv/v, 0.02% total error, 400/350 ohms, C3 IP67 for stainless steel, IP65 for mild steel bases.

http://www.totalcomp.com/base-scales-tbt-totalcomp-base-c-206_1132.html

Totalcomp the weigh you want today! http://www.totalcomp.com/

*NEW PRODUCT* Transcell Technology TI-1680 Digital Indicator - Totalcomp Scales & Components

Stainless steel. Large easy to read LCD display. Applications are Piece Counting, Remote Display, Peak Hold, Checkweighing, Batching, Accumulation, Self diagnosis. Gross/Net/Tare print ticket mode with 6 digit ID number. Two full duplex RS232 serial port. Internal power supply. Custom unit. 2.0, full speed, peripheral USB port. Heavy duty swivel mounting stand. NEMA 4x, IP65. 240 VAC. NTEP pending.

http://www.totalcomp.com/transcell-weighing-indicators-ti1680-transcell-indicator-c-325_335_1131.html

Totalcomp the weigh you want today! http://www.totalcomp.com/